AirWatch AQMS
Station aqms-monitor · --:-- GST
Connecting…

Loading the latest reading…

Fetching data from the Dubai station.

Last reading—
Calibration—

Rolling Averages (10 min · 20 min · 30 min)

Time-windowed averages across all monitored gases. Click any window to switch the dashboard view.

Trend & Rolling Curves

Tap a gas card or choose below. Hover the chart to compare Live vs 10m / 20m / 30m rolling averages.

Last 24 hours at a glance

Each block is 10 minutes. Hover a block for details.

Temperature—Open-Meteo, Dubai
Humidity—relative humidity
Pressure—surface
Wind — direction
Station power—battery
Data link—Firebase
Technical details — raw signals, quality flags, calibration, recent packets

Latest raw packet

—

Per-gas quality

Recent packets

How the numbers are made

  • Alphasense calibration values only. Each gas uses an Alphasense zero and sensitivity: the sensor's own factory sheet where available, otherwise Alphasense's datasheet typical values. No filtering, smoothing or temperature tables. A negative result is shown as 0, and the averages use those values.
  • NH₃ (Alphasense NH₃-B1+, factory sheet 77840031, A0): (A0 mV − 328) / 58.624 ppm (58.624 mV/ppm = 73.28 nA/ppm × 0.8 mV/nA).
  • H₂S (Alphasense H2S-B4, A1 working / A2 auxiliary): ((A1 − 458) − (A2 − 359)) / 1.727952 ppb. Sensitivity from its factory sheet; zeros from a site zero (the station's clean-air output, 02:00–05:00 Dubai), as Alphasense advise. Factory-sheet zeros: 395 / 362 mV.
  • VOC (Alphasense PIDX-A-040, A3): (A3 − 70) / 55 ppm isobutylene — Alphasense datasheet typical (offset 40–100 mV, midpoint used; 55 mV/ppm). Indicative until its factory sheet is entered.
  • 10 / 20 / 30-minute values are plain averages of the readings in each window. Alarm levels use the 10-minute average. Weather is shown for information only.